Hot Water System Isolators & RCD

Your Hot Water Service now requires a lockable isolator switch beside it and a Safety Switch installed at the switchboard

Faulty - Hot Water Service -
We replace Hotwater Elements / Thermostat's

Your Plumber may need to replace the Anode in your Hot Water Cylinder, these are often checked every 5 years
Load Control Economy Tariff 33 is for your Hot Water Cylinders, Pool Pump or other permantly connected Appliances.

Economy Tariffs will require the installation of dedicated power circuits run back to your Main Switch Board and the required Control wiring will also be installed in preparation for the Metering Providers additional Meter and Riple Relay.

Tariff 33 Economy on for 18 plus hrs - Pool pumps & Hot Water Cylinders
Tariff 31 Super Economy on for 8 plus hrs only.

These circuits are Dedicated Appliance Circuits which run all the way back to your Main Switchboard including the requirement for us to fit additional Safety Switches to each of these new circuits you may need us also to install a contactor and additional control wiring,

Keep in mind also that you may need to have installed an additional Meter at your Meter Panel,
plus the Load Control Relay. Which would mean that you will be up for Additional Charges by Your Metering Service Provider who now fits There Equipment At A Cost To You. (Remember to go on line with your Power Authority and complete the Connect Application Form or ask us to help you complete your application-Online

Older Meter Pannels: Often require replacement to proceed with this type of work above- Upgrading is to allow space for the service providers additional equipment as Ruled
There specifications requirements are mandatory & some times the work involved out ways any econnomoic reason for proceeding in connecting your appliances to Load Control Tariff's